Stone cutting machine Common Faults and exclusion program

2010-02-06    Source:BOSUN TOOLS

Stone cutting machine Common Faults and exclusion program:

Motor does not turn

Reason：The power block-up, joint loosening

suggest ：Repair the power supply, check all the connectors and tighten.

Reason：Propulsive force too much, leading to switch trip.

suggest：5-minute break after the restart（Single-phase cutting confidential press the reset button and then start the overload protection device）

Slow cutting

Reason：Belt too loose

suggest ：Tension the Belt

Reason：The blade is lower

suggest ：With the wheel or hard brick blades sharpened

Reason：Power Supply Voltage Low

suggest ：Ensure that the cutting machine at rated voltages

 

 

 

TAG：None

RSS：

 

Prev  None... Next  Common Faults and ex...